DREW'S 6-INCH CONTRACTOR TOE CAP - ROWDY SMOOTH

Drew's Boots
$429.95

All boots we make are produced by craftsmen who have decades of shoemaking experience and in some cases third generation shoemakers. These boots are hand-lasted using old-world techniques and with the best components sourced across the world. Our upper leather is made with US hides that are 6.5-7oz thick, we use an industry first pre-molded leather insole. Our insole is full grain veg tanned leather, 5 – 5.5 millimeters thick and precisely molded to the bottom of the last. Each insole is individually molded to the exact size and width over a period of 48 hours. The molding process does not compress the insole or change its thickness, but significantly reduces the break in period and increases comfort out of the box. Break-in redefined (TM) Over time, the insole will mold to the foot and the natural imprint will enhance comfort even more while still providing arch support with minimal break in.

Our contractor series has the same upper design and pattern as our Drew's Loggers but in shorter heights and built with Vibram 430 Mini Lug soles for more versatility on the job site, hitting the town with your spouse or for style without dragging in the mud! This boot features a second layer of leather on the toe cap, providing extra durability where it’s needed most.

Our last: We took the 55 shoe last used in the PNW boot industry for decades and made it better! With boots on the ground and listening to our customers for years, we knew there was a better way. The natural progression of people have been getting bigger and wider feet - we added about an 1/8" to the outside of the last to allow more room in the toe box and eliminate that "pinkie rub." We also raised the instep slightly to allow an easier foot entry into the boot. With the fit alterations to the last and the pre-molded insole, these boots will be the best and easiest break-in of the industry. 

Our Leather: Developed exclusively for Drew's Boots, our hides are from the US and tanned and processed in the Leather Capital of the World: Leon, Mexico. The tanning process is similar to Horween Chrome Excel or Seidel Double Shot, as the leather has a great pull up effect, re-tanned and then double stuffed with natural oils and waxes to give this leather a great look and soft feel to the foot without compromising wear and durability. This leather is 2.5-2.8MM in thickness. The color is beautiful and will pair with anything and still tough enough for the job site. We call this leather "Rogue" because it looks brown-ish, red-ish, burgundy-ish and couldn't settle on a true color name!  

Guts of the boot: We are using a veg tanned leather toe box (no plastic or celastic), leather heel counter, shank and heel base. 

Details: One piece backstay / pull loop, scored midsole to place shank and nails precisely on each pair of boots, we use a high-pressure hydraulic press plus a press pad which is the exact negative of the Vibram 100 outsole to get an extreme bond to reduce squeaking and delamination. 

  • These are not true to size. Please size down 1/2 a size from your *seated* Brannock size. (Example: 10D seated Brannock = 9.5D logger)
  • Or size down 1.5 sizes from your average shoe size. (Example: 10D sneaker = 8.5D logger) 
  • 2.5-2.8MM leather (6.5-7oz)  
  • Leather lined toe vamp
  • Pre-Molded Leather insoles
  • Leather Toe Box
  • Leather Heel Counter
  • Rebuildable/Resoleable
  • Leather midsole, shank and heel base
  • Vibram® 430 Mini Lug Sole
  • Solid Brass hardware
  • Handmade in Leon, Mexico using the worlds best components
  • Please allow 2-3 business days to process and ship orders - thank you!