Drew's 6 inch Contractor Harvest Tan Cap Toe

Built by Generations, Crafted to Last

Every pair of our boots is handcrafted by skilled artisans—many with decades of experience, some tracing their shoemaking roots back three generations. Using time-honored, old-world techniques and the finest materials sourced globally, we ensure each boot meets the highest standards of durability and comfort.

Precision Fit & Break-In Redefined™

Our boots are hand-lasted, featuring premium US-sourced leather uppers measuring 6.5–7oz thick. We use an industry-first pre-molded leather insole, made from full-grain, vegetable-tanned leather that’s 5–5.5mm thick. Each insole is individually molded to the exact size and width over 48 hours, maintaining its full thickness while reducing break-in time and enhancing out-of-the-box comfort. Over time, the insole naturally conforms to your foot, improving comfort and support with minimal break-in.

Contractor Series: Versatility Meets Durability

Modeled after our Drew’s Loggers, the Contractor Series retains the same upper design and pattern but in shorter heights for added versatility. Built on Vibram® 430 Mini Lug soles, these boots transition effortlessly from job sites to nights out—giving you rugged durability without tracking in the mud.

A Last Designed for Today’s Foot

We started with the legendary 55 last, a staple in the Pacific Northwest boot industry, and made it even better. After years of real-world testing and customer feedback, we widened the last by 1/8” to provide more room in the toe box and eliminate the dreaded “pinkie rub.” We also raised the instep slightly, making it easier to slip the boot on. Combined with our pre-molded insole, this results in one of the most comfortable and easiest break-ins in the industry.

Built from the Inside Out

We don’t cut corners. Inside every boot, you’ll find:

✔ Vegetable-tanned leather toe box (no plastic or celastic)

✔ Leather heel counter, shank, and heel base for long-term durability

✔ One-piece backstay/pull loop for added strength

✔ Scored midsoles for precise shank and nail placement

✔ High-pressure hydraulic press bonding for extreme outsole adhesion—minimizing squeaks and delamination

Sizing Guide

These boots do not fit true to size. Please size down:

½ size down from your seated Brannock size (e.g., 10D Brannock → 9.5D Logger)

1.5 sizes down from your sneaker size (e.g., 10D sneaker → 8.5D Logger)

Specs at a Glance

• Upper Leather: 2.5–2.8mm (6.5–7oz), US hides, tanned in León, MX

• Toe Vamp: Leather-lined

• Insole: Pre-molded, full-grain, vegetable-tanned leather (5–5.5mm)

• Toe Box: Leather (no plastic/celastic)

• Heel Counter, Midsole, Shank, Heel Base: All leather

• Sole: Vibram® 430 Mini Lug

• Hardware: Solid brass

• Construction: Handmade in León, Mexico, using the world’s best components

• Rebuildable & Resoleable

These aren’t just boots. They’re an investment in comfort, craftsmanship, and durability.